TECHNICAL SPECIFICATIONS OF INDO FARM 2042 DI
  SPECIAL FEATURES
 




8+2 Speed Gear Box.
Speeds available for all applications.


Brakes on Intermediate shafts resulting
in no water ingress during puddling.


High displacement, Powerful Engine.


Recirculating Ball type Steering prevents
transmission of shocks to the steering wheel.


Straight Rear Axle for easy
maintenance and minimum wear & tear.


Low Maximum rated Engine RPM-higher
Engine life due to low wear and tear.


Epicyclic Reduction for High/Low
Speeds-reduces noise & increases life.


Oil immersed Brakes for better braking due to larger braking area & longer life due to oil cooling.		  
 
HP Range 45
Type Diesel, Four Stroke Direct Injection
No. of Cylinders Three
Bore/Stroke 91.44/127 mm
Compression Ratio 18.5:1
Rated Speed 2000 RPM
Max. Torque Speed 1200-1300 RPm
Air Cleaner i) Oil Bath Type, with Cyclonic Pre-Cleaner
ii) Dry Type (Optional)
Fuel Pump Inline, Make : Bosch India
Cooling System Water cooled
Clutch System i) Single/Dual
ii) Main Clutch Disc Cerametallic (Optional)
Hyd. Pump Gear Type
Lifting Capacity 1400 kg at Lower Link Ends
Electrical 12 Volts-88 Ah Battery

Self Starter Motor & Alternator
Tyre Front 6.00x16
Rear 13.6x28
Wheel Track 1355-1895 mm
Measurement Length 3600 mm
Width 1670 mm
Height upto streering 1635 mm
Min. Ground Clearance 390 mm below R.T. Housing
Weight 1875 kg
P.T.O. No. of Splines 21 6
PTO Speed 1000 RPM 540 RPM (Dual Clutch)
Driver's Seat Adjustable
Transmission

No. of Gear Speeds

 8 Forward 2 Reverse
Steering i) Mechanical-Recirculating ball type
ii) Hydrostatic Power Steering (Optional)
Steering wheel dia 430 mm
Min. Turning radius 3.2 m
Brake Type

i)  Dry : Double disc type (190 mm dia) 

    with parking brake lever
ii)  Wet : Oil immersed multiple discs (Optional)
 

Hydraulic (ADDC) : Two lever, automatic Draft and Position control with mix control.

1. Position Control : To pre-select and automatically maintain certain position or depth of the implement attached to three-point-linkage

2. Draft Control : To automatically raise and lower an attached implement as the draft or resistance of the implement increases or decreases.

3. Mix Control : To automatically maintain shallow depths in loose soils where draft control is inefficient.

 

Gear Speed (13.6x28 Rear Tyre)
Direction Gear

Road Speed (km/h)
Low High
Forward 1 2.28 8.99
  2 3.21 12.64
  3 5.51 21.68
  4 7.36 28.97
Reverse 1 3.20 12.59

Suitable Implements

11 Tine Tiller

2/3 Bottom M.B. Plough

12 Disk Harrow

5 Ton Trailor

Rotavator 36 blades

Accessories with Every Tractor

Trailor Hook

Draw bar
Draw bar
Fender Guard
Heavy Bumper
Tool Kit
Operator Manual

All the above specifications are subjects to change without notice.

For detail information contact your nearest dealer.

 

 

 

<<<Click to Back