SPECIAL FEATURES TECHNICAL SPECIFICATIONS OF INDO FARM 3065 DI



8+2 Speed Gear Box.
Speeds available for all applications.





Brakes on Intermediate shafts resulting
in no water ingress during puddling.





Recirculating Ball type Steering prevents
transmission of shocks to the steering wheel.





Straight Rear Axle for easy
maintenance and minimum wear & tear.





Epicyclic Reduction for High/Low
Speeds-reduces noise & increases life.





Oil immersed Brakes for better braking
due to larger braking area
& longer life due to oil cooling.		  
 
HP Range 65
Type Diesel, Four Stroke Direct Injection
No. of Cylinders Four
Bore/Stroke 102/110 mm
Rated Speed 2200 RPM
Air Cleaner i) Oil Bath Type, with Cyclonic Pre-Cleaner
ii) Dry Type (Optional)
Fuel Pump Inline, Make : Bosch India
Cooling System Water cooled
Clutch System i) Single/Dual
ii) Main Clutch Disc Cerametallic (Optional)
Hyd. Pump Gear Type
Lifting Capacity 1800 kg at Lower Link Ends
Electrical 12 Volts-120 Ah Battery

Self Starter Motor & Alternator
Tyre Front 7.50x16 6.50x20
Rear 16.9x28 16.9x28 (Optional) 
Wheel Track 1498-2011 mm
Measurement &
Weight		 Length 3630 mm
Width 1950 mm
Height upto streering 1710 mm
Min. Ground Clearance  455 mm below R.T. Housing
Min. turning Radius  3.5 m 
Weight 2345 kg
P.T.O. No. of Splines 21 6
PTO Speed 1000 RPM 540 RPM (Dual Clutch)
Driver's Seat Adjustable
Transmission

No. of Gear Speeds

 8 Forward 2 Reverse
Steering i)  Mechanical-Recirculating ball type
ii) Hydrostatic Power Steering (Optional)
Brake Type

i)  Dry : Double disc type (190 mm dia) 

ii)  Wet : Oil immersed multiple discs (Optional)
Brake Actuation Mechanical, independent right/left or combined
 

Hydraulic (ADDC) : Two lever, automatic Draft and Position control with mix control.

1. Position Control : To pre-select and automatically maintain certain position or depth of the implement attached to three-point-linkage

2. Draft Control : To automatically raise and lower an attached implement as the draft or resistance of the implement increases or decreases.

3. Mix Control : To automatically maintain shallow depths in loose soils where draft control is inefficient.

 

Gear Speed (16.9x28 Rear Tyre)
Direction Gear

Road Speed (km/h)
Low High
Forward 1 2.76 10.93
  2 3.88 15.27
  3 5.79 22.79
  4 8.96 35.05
Reverse 1 3.87 15.23

Suitable Implements

13 Tine Tiller

3 Bottom M.B. Plough

16 Disk Harrow

6 Ton Trailor

Rotavator 42 blades

Accessories with Every Tractor

Trailor Hook

Draw bar
Draw bar
Fender Guard
Heavy Bumper
Tool Kit
Operator Manual

All the above specifications are subjects to change without notice.

For detail information contact your nearest dealer.

 

<<<Click to Back